[FSPA] previously unknown pinball technique discovered?

[Steve Peck]

it doesn't take that much force. Certainly less than standard nudging and
not in a way that could ever hurt a machine.

You bet I'm doing this for 15 seconds in comp rather than waiting 3 min for
a bobber to stop and I doubt there's any rule against such a thing.

On Thu, Sep 6, 2018, 10:44 PM eric schoch via FSPA <fspa at fspazone.org>
wrote:

> If someone complains at a tournament you tell them to “STFU i am playing
> pinball.  Do some research!”
>
> On Thursday, September 6, 2018, 9:59:24 PM EDT, Dave Hubbard via FSPA <
> fspa at fspazone.org> wrote:
>
>
> So... basically you're beating on the cabinet instead of just waiting for
> the tilt bob to slow down on its own.  Two comments:
>
> 1) If I ever saw you do this to one of my pins, that would be the last
> time you play it.
> 2) If you were doing this next to me in a tournament, a TD is getting
> called for interference.
>
> Sure, it works, but it's just about the most annoying "technique" I can
> think of.
>
> Flame away.
>
>      --- Dave
>
> On Thu, Sep 6, 2018 at 9:53 PM, Roy via FSPA <fspa at fspazone.org> wrote:
>
> https://www.youtube.com/watch? v=_slFooZkmpw&feature=youtu.be
> <https://www.youtube.com/watch?v=_slFooZkmpw&feature=youtu.be>
>
>
> On 9/6/2018 9:36 PM, Colin Horner via FSPA wrote:
>
> Is there anything that would convince you to "give up" that pursuit?
>
> Josh Jurgensen via FSPA <fspa at fspazone.org> <fspa at fspazone.org> wrote:
>
> If this 'video proof' turns out to just be a Rick astley clip, I'm going
> to run the risk of getting expelled from all FSPA activities just to slam
> tilt any machine you're playing.
>
> On Thu, Sep 6, 2018, 7:56 PM Steve Peck via FSPA <fspa at fspazone.org>
> wrote:
>
> sounds like it really is a new discovery. i'll make a video when i can.
>
> it's a bare handed nudging technique that should work on any machine
>
> On Thu, Sep 6, 2018 at 1:13 PM, Brian Newhard via FSPA <fspa at fspazone.org>
> wrote:
>
> Rare earth magnet on the bottom of the cabinet?
>
> On Thu, Sep 6, 2018 at 12:58 PM, Steve Peck via FSPA <fspa at fspazone.org>
> wrote:
>
> Hey all,
>
> I might have discovered a previously unknown pinball technique. Not sure
> what to do with the info.
>
> I need to make a video to demonstrate, but first thing is I want to make
> sure it's not already known
>
> so does anyone know of a way to reliably, consistently, and quickly stop a
> tilt bobber swinging from normal playing conditions outside the cabinet?
>
> -Steve
>
> ______________________________ _________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/ mailman/listinfo/fspa
> <http://lists.fspazone.org/mailman/listinfo/fspa>
>
>
>
> ______________________________ _________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/ mailman/listinfo/fspa
> <http://lists.fspazone.org/mailman/listinfo/fspa>
>
>
> ______________________________ _________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/ mailman/listinfo/fspa
> <http://lists.fspazone.org/mailman/listinfo/fspa>
>
>
>
> ______________________________ _________________
> FSPA mailing listFSPA at fspazone.orghttp://lists.fspazone.org/ mailman/listinfo/fspa <http://lists.fspazone.org/mailman/listinfo/fspa>
>
>
>
> ______________________________ _________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/ mailman/listinfo/fspa
> <http://lists.fspazone.org/mailman/listinfo/fspa>
>
>
>
>
> --
> "Never give up on something that you can't go a day without thinking
> about."
> _______________________________________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/mailman/listinfo/fspa
> _______________________________________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/mailman/listinfo/fspa
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fspazone.org/pipermail/fspa/attachments/20180906/eec38450/attachment.html>