<div dir="ltr">i have had zero luck with any of these methods.  i think the ball trails in my case are just too deep to come out without removing artwork.  </div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Aug 3, 2017 at 2:03 PM, Scott Sidley via FSPA <span dir="ltr"><<a href="mailto:fspa@fspazone.org" target="_blank">fspa@fspazone.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">the Mr Clean erasers self ablate, so while the structure deforms with<br>
the surface it also<br>
is destroyed by the surface, its grit factor is like 20 on anything<br>
above the surface,<br>
the trick is getting enough of it below the surface to pull dirt out<br>
of the track. The smother<br>
the surface the higher the grit number for the erasers.<br>
<br>
They work somewhat dry, but are designed to be wet, so using denatured<br>
Alcohol is the<br>
way to go (wear gloves and dont breathe too hard)<br>
<br>
Be careful, since it will still scrub ink and paint off if that is the<br>
anything above the surface.<br>
Also denatured Alcohol will start dissolving the ink or paint, so you<br>
need to be cautious.<br>
<br>
The only down side is that, since the eraser ablates, everything is<br>
coated with a fine white powdery<br>
film, just like calcium chloride in your dishwasher.  Removing that<br>
film is the hardest step,<br>
I go through multiple microfiber cloths getting that off. (which<br>
usually are not cleanable, so be prepared<br>
to toss them)<br>
<br>
you then fill the track with hard wax  or if you are bold, new hard coat.<br>
<br>
you can also use CP100 with them, but I can usually pull more ink off that way.<br>
<br>
Some really old hardcoats soften and start dissolving with denatured<br>
Alcohol, so always check<br>
that under the apron.  If the coating is going to come off, you would<br>
need a different way.<br>
<div class="HOEnZb"><div class="h5">______________________________<wbr>_________________<br>
FSPA mailing list<br>
<a href="mailto:FSPA@fspazone.org">FSPA@fspazone.org</a><br>
<a href="http://lists.fspazone.org/mailman/listinfo/fspa" rel="noreferrer" target="_blank">http://lists.fspazone.org/<wbr>mailman/listinfo/fspa</a><br>
</div></div></blockquote></div><br></div>