[FSPA] deep ball trails/dremel?

[Steve Peck]

i havent. arent they extremely abrasive?


On Wed, Aug 2, 2017 at 12:57 PM, Tim of Premier Amusements via FSPA <
fspa at fspazone.org> wrote:

> Have your tried Mr Clean Magic Eraser?
>
>
>
> *From:* FSPA [mailto:fspa-bounces at fspazone.org] *On Behalf Of *Steve Peck
> via FSPA
> *Sent:* Wednesday, August 02, 2017 12:42 PM
> *To:* FSPA main discussion list <fspa at fspazone.org>
> *Cc:* Steve Peck <speckking at gmail.com>
> *Subject:* Re: [FSPA] deep ball trails/dremel?
>
>
>
> Thanks for the info. most of the trails are in places that arent visible,
> (inner loop that's under a side ramp, etc) and i'm planning on applying
> mylar to these locations.
>
> I may have done a poor job explaining as well. for the most part the
> trails are barely more severe than what novus can handle.
>
> I ended up having success using novus 2 on a dremel polishing pad @ 5k rpm
>
>
>
> On Wed, Aug 2, 2017 at 12:21 PM, The Bob via FSPA <fspa at fspazone.org>
> wrote:
>
> Uh...playfield polishing at least what you're talking about is best done
> with a random orbit polisher.  If it's like an inlane groove or something
> localized and fairly hidden you could try the dremel.  You could also try
> Novus 3 but realize it's going to cut through the clear coat pretty quickly.
>
> I'd read the Vid1900 thread on playfield refurbishment on Pinside before I
> went nuts though.
>
>
>
> On Wed, Aug 2, 2017 at 11:48 AM, Steve Peck via FSPA <fspa at fspazone.org>
> wrote:
>
> Hey guys,
>
> I have a mid 90s dmd with a pretty nice playfield but there's a few spots
> where the ball trails have actually caused scratching/contour and wont come
> up with just novus 2.
>
> Anything i can do about those areas perhaps with a dremel? i have a wide
> variety of heads including polishing pads.
>
> Any other solutions are welcome as well.
>
> thanks,
>
> Steve
>
>
>
> _______________________________________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/mailman/listinfo/fspa
>
>
>
>
> _______________________________________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/mailman/listinfo/fspa
>
>
>
> _______________________________________________
> FSPA mailing list
> FSPA at fspazone.org
> http://lists.fspazone.org/mailman/listinfo/fspa
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fspazone.org/pipermail/fspa/attachments/20170802/bddf232d/attachment.html>